The device comes programmed with the following default connection settings:
- WIFI SSID : linksys
- WIFI encryption : None
- Netbios name : WXBOARD
- DHCP : Enabled
- Login Username : admin
- Login Password : admin
The factory values can be recovered by doing a factory reset procedure. Follow the steps below to erase all configuration data and restore initial default settings:
- Press and hold S1.
- While holding S1 press Reset momentarily.
- Keep holding S1 and wait 4 seconds until all 3 LEDs blink in unison.
- Release release S1. –> Device will now reboot with default connection settings.